Blowout Preventer -

7 1/16” Single and Double RAM BOP

Single Ram

Specification

Part List

Integrated Equipment Inc. 7" Ram BOP’s are available in single and double ram configurations with pressure ratings of 2000 / 5000 psi (13.8 / 34.5 MPa) and adaptable to 3000 psi (20.7 MPa). The double ram configurations with pressure ratings of 2000/ 5000 psi ( 13.8 / 34.5 MPa) and adaptable to 3000 psi (20.7 MPa). The double ram BOP is less than 2 feet (610 mm) in height and weighs under 2300 pounds (1034 kilos) allowing use in the smallest rig cellars / sub structures.. Ram blocks are available, as standard, from Blind thru 4 1/2" (114.3 mm).

End Connections are double drilled to accept 2000 / 5000 psi (13.8 / 34.5 MPa) and adptable to 3000 psi (20.7 MPa) mating flanges for ease of installation during rig up.

Features :

	All wetted wellborne surfaces comply with the latest revision of NACE MR-01-75			All hydraulics ported internally
	Field-proven design			Only standard tools required for maintenance
	Oversized operators			Double drilled 2000 / 5000 psi (13.8 / 34.5 MPa) and adaptable to 3000 psi (20.7 MPa)
	Short height			Standard end connections
	Light weight

Specification :

Integrated 7 1/16" 2000 and 5000 Single and Double Ram BOP

Single RAM BOP

Part List :

Single and Double Ram BOP

Item	Qty	Description
1	1	BOP Body
2	2	Hoist Ring
3	4	Locator Pin
4	2	Blind Ram Body
5	2	Blind Ram Front Packer
6	2	Ram Top Seal
7	2	Pipe Ram Body
8	2	Pipe Ram Front Packer
9	2	Pressure Door
10	4	O-Ring
11	4	Eye Boit
12	4	Hex Nut
13	4	Guide Pin Stude
14	4	Guide Pin
15	20	Pressure Door Cap Screw
16A	2	Bonnet Body, RH
16B	2	Bonnet Body, LH
17	4	Injection Port Pipe Pluge

Item	Qty	Description
18	4	Injection Port Set Screw
19	4	Injection Port Check Valve
20	4	Plastic Packing Stick(not show)
21	4	Seel Sleeve, Short
22	4	Seel Sleeve, Long
23	4	Piston Rod
24	4	Cylinder
25	4	Piston Body
26	4	Piston Set Screw
27	4	Lockscrew
2&A	4	End Cover, RH
2&B	4	End Cover, RH
29	4	Pipe Pluge
13	16	Bonnet Stude
31	16	Heavy Hex Stude
32	8	End Cover Stude
33	8	Heavy Hex Nut
34	4	LockScrew Protector

Item	Qty	Description
35	16	Cap Screw
36	16	Lock Washer
37	4	Seal Repair Kit
37A*	8	Seal Sleeve O-Ring
37B*	1	Tefflon Ring
37C*	1	Bonnet I.D.T-Seal
37D*	1	Injection Energizing Ring
37E*	1	Injection Packing Ring
37F*	2	PolyPack Ring
37G*	1	Wiper Ring
37H*	1	Bonnet O-Ring
37J*	1	Non-Extrusion Ring
37K*	1	Piston Road O-Ring
37L*	2	Non-Extrusion Ring
37M*	2	Cylinder O-Ring
37N*	2	Non-extrusion Ring
37P*	1	Piston T-Seal
37R*	1	End Cover T-Seal