Group Home | Sitemap
 
Pulsation Dampener

Pulsation Dampeners


  Drilling Pulsation Dampener   Production Pulsation Dampener

Integrated Equipment offers a range of Drilling and Production Pulsation Dampeners that are unique in design and construction. Integrated Dampeners are available from 1 gallon to 20 gallon capacities and in pressure ranges from 285 psi to 7500 psi.The bodies for both styles are of single piece construction which eliminates the possibility of weld failures in the field. The charging valve for both the Drilling Dampener and the Production Dampener are protected by heavy duty impact resistant protective covers.
Sizing/Selection of Pulsation Dampeners
Pulsation Dampener selection is a critical process which requires a through knowledge of a pressure system, the system components and the fluid characteristics. Please consult your Integrated representative for assistance in making sure the Pulsation Dampener you select is right for your specific application.

Drilling Pulsation Dampener


Features :
Single piece construction with no girth welds.   Diaphragm equipped with stabilizer to eliminate possible folding and entrapment of fluids resulting in increased diaphragm life.
Inside surface machined fro smooth diaphragm movement.   Field replaceable diaphragms reduce maintenance time.
Field replaceable top and bottom plates reducing downtime.   Diaphragms can be replaced without removing the unit from the line.
Nitrile (NBR) and Hydrogenated Nitrile (HNBR) diaphragms standard.      

Specification :
   
Model Volume MAWP Weight Dimensions
A B C
Gallons psig Pounds
inches mm inches mm inches mm
IE-10-3000 10 3000 950 23.75 603 22.68 576 29.44 748
IE-10-5000 10 5000 950 23.75 603 22.68 576 29.44 748
IE-20-3000 20 3000 2500 28.25 718 29.00 737 38.50 978
IE-20-5000 20 5000 2500 28.25 718 29.00 737 38.50 978
IE-20-7500 20 7500 2500 28.25 718 29.00 737 38.50 978
 
Drilling Pulsation Dampener

Production Pulsation Dampener


Features :
Short, compact design requires no external bracing or other support structures.  
Standard applications include waste disposal, salt water injection, caustic products and other corrosive liquids.
Isolated body cavity keeps the fluid in the diaphragm.  
High pre-charge capability delivers excellent dampening performance. A minimum of 85% reduction in peak-to-peak pressure performance is achieved.
Nitrile (NBR) and Hydrogenated Nitrile (HNBR) diaphragms standard.  
All rubber components supplied with Integrated pulsation dampeners as original equipment and / or furnished as replacement parts are under Integrated design and quality control and carry Integrated Equipment’s standard manufacturers warranty.
Replaceable CS or SS jam nut style bottom plate standard.   Pressure rating from 285 psig to 6170 psig.
Sizes range from 1 gallon to 20 gallon   Fully enclosed and protected charging valve assembly.

Specification :
   
Model Volume MAWP Weight A B C
Gallons psig Pounds inches mm inches mm inches mm
IE-1-285 1 285 118 11.44 291 9.81 249 17.31 440
IE-1-1480 1 1480 124 11.44 291 10.04 255 17.54 445
IE-1-3705 1 3705 150 11.44 291 10.12 257 17.82 453
IE-1-6170 1 6170 240 12.50 316 11.00 279 17.50 445
IE-2 1/2-285 2 1/2 285 173 14.25 362 11.45 291 19.73 501
IE-2 1/2-1480 2 1/2 1480 226 14.25 362 11.92 303 20.20 513
IE-2 1/2-3705 2 1/2 3705 237 14.25 362 12.16 309 20.44 519
IE-2 1/2-6170 2 1/2 6170 440 15.63 397 14.46 367 22.74 576
IE-5-285 5 285 120 16.00 406 13.75 349 20.75 527
IE-5-1480 5 1480 300 18.00 457 15.50 394 22.50 572
IE-5-3705 5 3705 300 18.00 457 15.50 394 22.50 572
IE-5-6170 5 6170 744 20.10 511 18.43 468 26.71 676
IE-10-285 10 285 400 20.50 521 19.25 489 26.00 660
IE-10-1480 10 1480 400 20.50 521 19.25 489 26.00 660
IE-10-3705 10 3705 700 21.50 516 21.25 540 28.00 711
IE-20-285 20 285 440 24.00 610 21.00 533 27.50 699
IE-20-2250 20 2250 870 25.50 648 24.00 610 30.75 781


Drilling Pulsation Dampener